Skip To Content

ArcGIS Web Adaptor 10.7.x system requirements

The system and hardware requirements to run ArcGIS Web Adaptor are listed below. For information about earlier versions, see Esri Support.

It's recommended that you review the deprecation notice to determine if your hardware and software are still compatible with version 10.7.1.

Operating system and application/web server requirements for ArcGIS Web Adaptor (IIS)

The following application/web servers are supported on these operating systems:

  • IIS 10
  • IIS 8.5
  • IIS 8
  • IIS 7.5
  • IIS 7

Future updates on these application/web servers are supported unless otherwise stated.

Note:
For ArcGIS Notebook Server configuration with ArcGIS Web Adaptor (IIS), IIS 8.0 or later is required.

Supported operating systemsLatest update or service pack tested

Windows Server 2019 Standard and Datacenter (64 bit [EM64T])

April 2019 updates

Windows Server 2016 Standard and Datacenter (64 bit [EM64T])

April 2019 updates

Windows Server 2012 R2 Standard and Datacenter (64 bit [EM64T])

April 2019 updates

Windows Server 2012 Standard and Datacenter (64 bit [EM64T])

April 2019 updates

Windows Server 2008 R2 Standard, Enterprise, and Datacenter (64 bit [EM64T])

SP1 with April 2019 updates

Windows 10 Pro and Enterprise (64 bit [EM64T])

April 2019 updates

Windows 8.1 Pro and Enterprise (64 bit [EM64T])

April 2019 updates

Windows 7 Ultimate, Professional, and Enterprise (64 bit [EM64T])

SP1 with April 2019 updates

Prior and future updates or service packs on these operating systems are supported unless otherwise stated. The operating system version and updates must also be supported by the application/web server provider.

Note:

Windows 7, 8.1, and 10 are supported for basic testing and application development use only. They are not recommended for deployment in a production environment.

Application/web server and operating system requirements for ArcGIS Web Adaptor (Java Platform)

The following application/web servers are supported on these operating systems:

  • Apache Tomcat 7.0.92, 8.5.35, and 9.0.19
  • GlassFish 4.1.1
  • IBM WebSphere 8.5.5.9 and 9
  • JBoss Enterprise Application Platform 7
  • Oracle WebLogic 12c R1 and R2

Future updates on these application/web servers are supported unless otherwise stated.

Note:

Please verify that the internal JDK used by your Application server where you deploy the Java Web Adaptor is at the minimum of JDK 1.8.

Supported operating systemsLatest update or service pack tested

Windows Server 2019 Standard and Datacenter (64 bit [EM64T])

April 2019 updates

Windows Server 2016 Standard and Datacenter (64 bit [EM64T])

April 2019 updates

Windows Server 2012 R2 Standard and Datacenter (64 bit [EM64T])

April 2019 updates

Windows Server 2012 Standard and Datacenter (64 bit [EM64T])

April 2019 updates

Windows Server 2008 R2 Standard, Enterprise, and Datacenter (64 bit [EM64T])

SP1 with April 2019 updates

Prior and future updates or service packs on these operating systems are supported unless otherwise stated. The operating system version and updates must also be supported by the application/web server provider.

Java support (for Windows)

ArcGIS Web Adaptor 10.7 and 10.7.1 support Java 8.x and 12.x.

Legacy:

ArcGIS Web Adaptor 10.4.x supported Java 7.x and 8.x. ArcGIS Web Adaptor 10.5.x and 10.6.x support only Java 8.x.

Maximum installation instances

You can install a maximum of 21 instances of ArcGIS Web Adaptor (IIS) on a single machine. If more instances are required, install them on a separate machine.

If you have earlier versions installed on the machine, you are not required to uninstall them. For example, you can have 5 instances of ArcGIS Web Adaptor 10.4 and 21 instances of ArcGIS Web Adaptor 10.7.1 installed on the same machine. The maximum value only applies to instances of the same software version.

Microsoft .NET Framework 4.5.2 support

ArcGIS Web Adaptor (IIS) requires Microsoft .NET Framework 4.5.2 or later to be installed. If your operating system includes Microsoft .NET Framework 4.5.2, make sure it's enabled using Windows Features. If your operating system does not include Microsoft .NET Framework 4.5.2, you can download it from the installation media and enable it using Windows Features.

Microsoft IIS required components

ArcGIS Web Adaptor (IIS) supports IIS in Windows 7, 8.1, 10, Server 2008 R2, Server 2012, 2012 R2, 2016, and 2019 Standard/DataCenter. This corresponds to IIS versions 7.5, 8.0, 8.5, and 10. IIS must be enabled along with specific IIS 7.5, 8.0, 8.5, and 10 components. The setup will not proceed if IIS is not detected and specific IIS components enabled.

If you already have IIS 7.5, 8.0, 8.5, or 10 installed but are missing required IIS components, the setup will display the IIS requirements verification dialog box. This gives you the option to allow the installation to automatically enable any missing required IIS components. To do this, click I agree. To learn more, see the Automatically enabling IIS components section.

Note:

If you're going to perform a silent installation of ArcGIS Web Adaptor, all required IIS components must be enabled manually. The setup will not automatically enable missing IIS components when you're performing a silent installation.

To learn how to enable IIS on your operating system and optionally enable the missing IIS 7.5, 8.0, 8.5, or 10 components on your own, see the following topics: